PRO TECHNICIAN
Testing.
No-Load Test
Click on the appropriate buttons in the illustration.
Starter body
Terminal 50
Terminal C
Terminal 30
Checks the state of the contact point of the magnet starter switch and the contacts between the commutator and the brushes.
1.
No-load test
(1)
Hold the starter in a vise wedged between aluminium plates or a cloth.
(2)
Connect the removed field coil lead wire to terminal C.
(3)
Connect the battery positive (+) terminal to terminal 30 and terminal 50.
(4)
Connect an electrical tester between the battery positive (+) terminal and terminal 30.
(5)
Connect the battery negative (-) terminal to the starter body and turn the starter.
(61)
