PRO TECHNICIAN
Testing.
Hold-in Test
Click on the appropriate buttons in the illustration.
Starter body
Terminal 50
Terminal C
Field coil lead wire
Terminal 30
Test lead A
Hold-in coil
Pull-in coil
Pinion gear
Check that the holding coil functions normally.
1.
Hold-in test
(1)
Disconnect test lead A from terminal C with the pinion gear extended, after the pull-in test.
(2)
Check to ensure the pinion gear remains extended.
HINT:
•
Disconnecting test lead A, from terminal C cuts off the current into the pull-in coil and makes the current flow only into the hold-in coil.
•
If the pinion gear retracts, replace the magnet starter switch assembly.
(58)
