| 1. |
Check parts installation condition |
|
Perform the following checks to ensure that
all components and small fittings are installed properly in place:
|
|
•
|
Make sure that all disconnected connectors are
reconnected properly.
|
|
•
|
Pull each connector lightly to check that it
does not come off.
|
|
•
|
Use an offset wrench to check for loose bolts
and nuts, when attempting to turn in the tightening direction.
|
|
•
|
Make sure that no components or fittings are left
on the tray or the work bench.
|
